Limpiar Altavoz (Speaker Cleaner) – Soporte

Limpiar Altavoz reproduce sonidos graves que hacen vibrar el altavoz para ayudar a expulsar agua tras una salpicadura y a soltar el polvo superficial.

Cómo se usa

  1. Sube el volumen al máximo.
  2. Pon el móvil con el altavoz mirando hacia abajo.
  3. Elige Agua o Polvo y toca Empezar. Cada sesión dura 30 segundos; repite 2 o 3 veces si hace falta.

Preguntas frecuentes

No oigo nada. Sube el volumen. La app suena aunque el interruptor de silencio esté activado, pero no con el volumen a cero ni si el sonido sale por auriculares o Bluetooth.

Sigue sonando apagado. La app solo ayuda con un poco de agua o polvo suelto. No repara daños por líquidos ni seca el interior del móvil. Déjalo secar y, si no mejora, contacta con el fabricante o con un servicio técnico autorizado.

Contacto

Escribe tu duda o problema en las incidencias del proyecto en GitHub.

Política de privacidad


Speaker Cleaner – Support

Speaker Cleaner plays low-frequency sounds that make the speaker vibrate to help push out water after a splash and loosen surface dust.

How to use it

  1. Turn the volume all the way up.
  2. Hold the phone with the speaker facing down.
  3. Pick Water or Dust and tap Start. Each session lasts 30 seconds; repeat 2 or 3 times if needed.

FAQ

I can't hear anything. Turn the volume up. The app plays even with the silent switch on, but not with the volume at zero or when audio goes to headphones or Bluetooth.

It still sounds muffled. The app only helps with a little water or loose dust. It does not repair liquid damage or dry the inside of the phone. Let it dry and, if it doesn't improve, contact the manufacturer or an authorized service provider.

Contact

Send your question or problem through the project's GitHub issues.

Privacy policy